Stainless Steel Glass Spider Fittings

Product Details:

Our Support holder fitting of Two way Point type spider at angle 90 degree ASF-05 are comprehensively designed and engineered according to the European Standards (EC), US standards (ASME/ANSI) or local codes and regulations applying for specific countries. Structural calculations for steel and glass (linear and non-linear) are performed according to local standards with Finite Element Method/Analysis (FEM/FEA), using advanced analysis software.

Product Details:

Our Curtain wall fittings with single right arm One way Fin type spider Right side 45 degree ASF-09 are comprehensively designed and engineered according to the European Standards (EC), US standards (ASME/ANSI) or local codes and regulations applying for specific countries.

Product Details:

 provides support to high-end exterior glass structures by means of point fixings. Constructed out of stainless steel, these fixings are excellent for absorbing and distributing all dynamic and static loads of the glass structure such as the dead weight of the glass, differential expansion due to temperature fluctuations, and the wind loading.

Product Details:

We manufacture the Stainless steel spider fitting fin plate AFP-01 which gives 

·         Three point holding with each fin part,

·         Elongated holes allows installation flexibility,

·    prevent damage to glass. which is made of Stainless steel 304 grade and satin or glossy type furnisged.

 

·         

Product Details:

304SS Point Type spider fitting Bolt for adjustable wall to glass curtain wall spider ASB-01 is a fixing screw/connector expressly  manufactured to perform better against rotational moment and torque.

Product Details:

This type of fixer is high recommend for hold the glass with the wall at 90 degree. It has durable and resistive property plus gives strenth to the structure and makes its life more usefull.

Product Details:

Safe glass fittings glass Four way Fin type glass wall connector  Spider ASF-01 represent the earliest form of structural glass facade and are used when the design intent is maximum achievable transparency. The result is a completely frameless and almost invisible facade, with no use of steel or concrete elements, providing complete air tightness and water proofing.

Product Details:

Canopy fittings that hold the cable or rod with the wall be used as a pair with ACF-02 Fixing on all types of structures,
Excellent mechanical performance,
Suitable for very large glass panes,
Validated any seismic zone,
Stainless steel 304,
Tested and certified by technical evaluation,
Quality and design,
Compatible with our omega range.

Product Details:

Spider glass fitting accessories that Hold canopy glass with cable or rod along with ACF-03 is the fitting that is specially design from Stainless steel 304 grade for glass curtain wall spider fitting. It has high strength, flexibility and resistance to corrosion.

Product Details:

Glossy or satin furnished canopy fittting that hold glass for canopy with cable or rod with ACF-04 is specially made for spider and canopy fittings foe highrise glass curtain walls. It has execellent performance property as well as it can resists wind or climate condition diffrences easly.

Product Details:

This is the fitting accessories which is highly use for high rise building for curtain the glass wall. It gives stability and resistivity to the glass curtain wall.Condibe Glass Canopy Fitting hold the cable or rod with the wall be used as a pair with ACF-05 is made of high quality steel of grade 304 for interior and exterior weather conditions.

Product Details:

Canopy fittings that hold the cable or rod with the wall be used as a pair with ACF-02 Fixing on all types of structures,
Excellent mechanical performance,
Suitable for very large glass panes,
Validated any seismic zone,
Stainless steel 304,
Tested and certified by technical evaluation,
Quality and design,
Compatible with our omega range.

Product Details:

We are the manufacturer and supplier in world wide for the Pipe to glass fitting for glass railing fitting for indoor and outdoor balcony and staircase A-R-02 as per the international standards for quality control and safety parameters

Product Details:

2 head stainless steel glass wall connector Two way Fin type spider ASF-02 are made of high quality stainless steel. Spider is processed according to safety requirements, usually being tempered or tempered laminated as well as heak soak tested.

Product Details:

Owing to their easy installation and maintenance, 
Four way Point type Spider for curtain wall glass spider fittings  ASF-03
 are widely used in offices and building complexes. All uPVC doors and windows can easily be inserted in spider glass areas.

Product Details:

Owing to their easy installation and maintenance,   are widely used in offices and building complexes. All uPVC doors and windows can easily be inserted in spider glass areas.

Product Details:

Our Condibe stainless steel satin finish Two way Point type spider at angle 180 degree ASF-05 re comprehensively designed and engineered according to the European Standards (EC), US standards (ASME/ANSI) or local codes and regulations applying for specific countries. Structural calculations for steel and glass (linear and non-linear) are performed according to local standards with Finite Element Method/Analysis (FEM/FEA), using advanced analysis software.

Product Details:

 Post Mounted One way point type spider ASF-07 provides support to high-end exterior glass structures by means of point fixings. Constructed out of stainless steel, these fixings are excellent for absorbing and distributing all dynamic and static loads of the glass structure such as the dead weight of the glass, differential expansion due to temperature fluctuations, and the wind loading.

Product Details:

For office building facade curtain wall system of Two way fin type spider at 90 degree angle ASF-08 represent the earliest form of structural glass facade and are used when the design intent is maximum achievable transparency. The result is a completely frameless and almost invisible facade, with no use of steel or concrete elements, providing complete air tightness and water proofing.

Product Details:

Single left arm One way fin point type spider left side 45 degree ASF-10 represent the earliest form of structural glass facade and are used when the design intent is maximum achievable transparency. The result is a completely frameless and almost invisible facade, with no use of steel or concrete elements, providing complete air tightness and water proofing.

Product Details:

Stainless steel 314 grade One way point type spider ASF-11 are made of high quality stainless steel. Spider is processed according to safety requirements, usually being tempered or tempered laminated as well as heak soak tested.

Product Details:

Owing to their easy installation and maintenance,   are widely used in offices and building complexes. All uPVC doors and windows can easily be inserted in spider glass areas.

Product Details:

Owing to their easy installation and maintenance, 
Quality Assured Customised Polish/satinone way  Spider Fitting For Fix GlassASF-14
 are widely used in offices and building complexes. All uPVC doors and windows can easily be inserted in spider glass areas.

Product Details:

Spider glass fitting SS material Splice plate ASP-01 is specifically designed for glass curtain walls hold its in position for its life periods also give stability and resistivity to the structure.

Product Details:

Easy installation Spider Glass Fittings Articulate Glass Routel ARF-01 has its own specifications like Threaded portion to adjust the height,
prevent damage to the glass;
Firm base to have a secure seating'
Flat head bolt and 
Stainless Steel Grade 304 for interior and exterior weather conditions.

Product Details:

Stainless steel 304 grade Spider Glass Fittings Articulate Glass Routel ARF-02 is a
Countersunk head bolt
Teflon washers to prevent damage to glass
Adjustable up to 15mm thickness of glass
Stainless Steel Grade 304
Available in PSS / SSS finish

Product Details:

Mirror Finish Glass spider Fixed head routel for wall glass fitting accessories ARF-04 is a fitting accessory to spider fitting which is used for fixed the spider in position and resist all the coming forces and climate condition.

Product Details:

Articulated Routel
Countersunk head bolt
Teflon washers to prevent damage to glass
Adjustable up to 15mm thickness of glass
Stainless Steel Grade 316
Available in PSS / SSS finish

Product Details:

We are the leading manufacturer and supplier of Easily installed SS good valued quality insured railing fittings for glass balcony wall A-R-04. We obligated to meet the quality standard as per the customer demand.

Product Details:

This Adjustable 90 to 180 Degree railing fitting for pipe to glass fiting on Balcony A-R-03 is especially made of stainless steel 202 /304 grade for the stair or balcony railing in high profile commercial compexes and hold hould properties.

Product Details:

Stainless steel AISI 304 & 202 Grade railing fitting Julla A-R-01 is that fitting accessories that is specially design for the stair and balcony glass railing fitting  and make it more attractive and durable.

Product Details:

High grade good polish stainless steel Fixed Head routel for glass curtain fittings ARF-06 is used for various application in commercial establishment and household. This fitting is specially design for the superb quality materialand sophisticated techonology incompliancewith international norms.